Before an aluminum foil container production line officially goes into operation, a series of supporting conditions must be prepared in the workshop in addition to the installation and commissioning of the equipment itself. Based on years of experience serving domestic and international customers, LIKEE has identified the following items as the most commonly overlooked, and hereby provides this checklist for customer reference.

1. Air Compressor

The stamping, feeding, and demolding actions of an aluminum foil container machine rely on compressed air. An air compressor is an essential prerequisite for normal production line operation.

Type Comparison

Parameter Recommendations: The recommended power for a single machine is 7kW. For future expansion, a 15kW model (capable of supporting 2-4 production lines simultaneously) is recommended. Maximum pressure should not be less than 0.8MPa, and air consumption should not be less than 1.4m³/min.

LIKEE can assist customers in purchasing suitable air compressors and related auxiliary equipment (air tanks, dryers, filters) to ensure the air supply system meets production line requirements.

2. Forklift

Aluminum foil coils and forming molds are both heavy and require specialized handling equipment to ensure operational safety and efficiency.

LIKEE offers sales of the above forklifts and handling equipment, allowing customers to purchase them together with the aluminum foil container machine for one-stop sourcing.

3. Stamping Oil

Specialized stamping oil is required during the aluminum foil stamping process for lubrication, cooling, and demolding. Lack of oil or improper oil selection can lead to tearing, sticking to the mold, and other quality issues, directly affecting the yield rate.

Technical Requirements: Food-grade or volatile stamping oil must be used to avoid residue affecting food contact safety.

LIKEE supplies its own stamping oil, specially formulated for aluminum foil container production lines, offering stable lubrication performance and minimal residue after volatilization. Customers are welcome to inquire and place orders.

4. Aluminum Foil Raw Material

Aluminum foil coils are the main raw material for production. Their alloy grade, thickness, width, and core inner diameter must precisely match the decoiler shaft specifications of the equipment.

LIKEE maintains long-term cooperation with multiple quality aluminum foil raw material suppliers and can assist customers in connecting with reliable sources, saving the trouble of searching and comparing suppliers independently.

5. Commonly Overlooked Preparation Items

Based on after-sales service records, the following items are most frequently overlooked by customers:

• Lack of dryers and filters for the air compressor, leading to moisture in the air line and abnormal cylinder operation

• Failure to prepare forklifts in advance, resulting in inability to unload or move molds and aluminum foil coils upon arrival at the workshop

• Stamping oil not purchased in advance, causing lubrication deficiencies and inability to produce normally during trial runs

• Aluminum foil coils not prepared in advance, leaving no material available for trial runs when the equipment arrives

Conclusion
Efficient startup of an aluminum foil container production line relies on the coordination between the equipment itself and the supporting workshop conditions. Air compressor, forklift, stamping oil, and aluminum foil raw materials — all four are indispensable.

LIKEE not only provides high-quality aluminum foil container machines and molds but also offers the following supporting services:

• Assistance with air compressor procurement
• Sales of forklifts and manual/electric handling equipment
• Stamping oil (our own product)
• Aluminum foil raw material supplier connection service